Panasonic Smoke Alarm EBL128 User Manual

Fire alarm system  
EBL128  
4550  
EBL128, an intelligent analog addressable fire alarm system for up to 128 addresses  
Auto generation of the Site Specific Data for easier c.i.e. programming  
Outputs for routing equipment. Fire  
alarm, Fault and Power supply.  
Analog addressable system  
EBL128 is an intelligent analog addressable  
fire alarm system, conforming to the EN54-2  
and the EN54-4 standards. It meets the most  
stringent requirements in order to secure real  
fire alarms and to reduce nuisance alarms.  
Socket for an optional RS485  
transceiver component to provide an  
interface for up to four ext. Fire Brigade  
Panels, Ext. Presentation Units and/or  
Alert Annunciation Units.  
Interface (RS232) for a PC (Win128)  
Interface (RS232) and power supply for  
Web-server 1588.  
Features / functions  
A user-friendly PC software Win128 is used  
to create, edit, download and upload  
(backup) the Site Specific Data (SSD).  
Optional RS485 transceiver 4552, provides  
an interface for up to four display units.  
An SSD Auto generation function is  
included in Win128. The units that are  
connected to EBL128 can be identified and  
the SSD can be auto generated with default  
settings and be edited before the download.  
Optional expansion boards 458x mounted in  
an exp. board holder 4551 provides 8 zone  
line inputs and 8 relay outputs respectively.  
Up to 128 addresses  
The EBL128 c.i.e. has one COM loop for  
connection of the loop units (address 001-  
127). Each loop unit uses one address.  
Some other features / functions:  
Compensation for contamination, i.e.  
analog smoke detectors have constant  
sensitivity in spite of any contamination.  
A Service signal will be given when a  
detector has to be replaced.  
Some loop units that can be connected:  
Analog heat & smoke detectors  
Addressable manual call points  
Advanced alarm algorithms are used  
to filter the nuisance alarms from the  
real fire alarms and one algorithm is  
used for detection of smouldering fires.  
User related functions, e.g. Test mode,  
Disablements, Alert annunciation, Fire  
door closing, Interlocking combinations  
of outputs & inputs, Time channels, Co-  
incidence alarm, User definable text  
message for each alarm point, etc.  
Addressable short circuit isolators  
Addressable input and output units (to  
which e.g. conventional detectors and  
manual call points can be connected)  
Addressable sirens & sounder bases  
Addressable external power supply units  
Miscellaneous  
The cabinet has a space for two sealed  
Lead-Acid batteries (2x12 V, 16-18 Ah).  
Programmable inputs and outputs. In  
the c.i.e. and/or via I/O units on the  
COM loop. A large number of trigger  
conditions are available.  
EBL128 is intended for indoor use and in  
dry premises.  
Panasonic Electric Works Fire & Security Technology Europe AB  
Citadellsvägen 23, SE-211 18 Malmö, Sweden  
Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99  
 

Miele Dishwasher G 803 User Manual
Miele Oven H4882BP User Manual
MTD Yard Vacuum 243 675 000 User Manual
Napoleon Grills Charcoal Grill M605RBCSS User Manual
Navman GPS Receiver ICN 330 User Manual
Olympus Camcorder 262901 User Manual
Olympus Camcorder c 120 User Manual
Oregon Scientific Clock BA812E User Manual
Oster Gas Grill 4770 User Manual
Panasonic Universal Remote FP0 Series User Manual