One for All Universal Remote URC 4700 User Manual

Crown  
Curtis Mathes  
Daewoo  
0180, 0039  
These GLOW keys are  
made of a phosphorescent  
material that Glows-in-the-  
dark. To activate the  
GLOWFeature, you must  
expose the GLOW Keys to  
bright light. The lenght of  
time the GLOW Keys  
remain illuminated will be  
determined by the lenght of  
time the remote is exposed  
to bright light.  
Setting Up Your Components  
0030, 0060, 0154, 0039  
0092, 0451, 0019, 0039,  
0091  
0019  
0145  
0017, 0019  
0000, 0185  
0381, 0389, 0409  
0236, 0463, 0019, 0154,  
0177, 0178, 0179, 0180,  
0181, 0182, 0183, 0185,  
0270, 0280, 0282, 0158,  
0038, 0039  
0030  
0154, 0159  
0179  
0171, 0179, 0180  
0180  
0047, 0051, 0055, 0451,  
0021, 0027, 0029, 0178,  
0279, 0282, 0135, 0174  
0017, 0019, 0030  
0019, 0030, 0178, 0409,  
0001, 0002, 0032, 0039,  
0106  
0053, 0056, 0170, 0392  
0179, 0180  
0178  
URC 4700  
Access 4  
Programming the One For All  
Access 4 to operate your TV:  
Daytron  
Denon  
Dumont  
Electroband  
Electrohome  
Emerson  
Locate the brand name of your TV and  
then write it in the space below.  
TV Brand: _____________________  
User Manual  
Locate the brand name of your TV in the  
“SETUP CODES FOR TVs” section. The  
brands are listed in alphabetical order  
with the most popular codes listed first.  
You will use one of these codes to  
program your One For All Access 4 to  
operate your TV.  
The MUTE key operates the  
same as the MUTE key on  
your original remote.  
MUTE  
Overview  
Envision  
Fisher  
Fujitsu  
Funai  
Futuretech  
GE  
Thank you for purchasing the One For  
All® Access 4™ universal remote  
control. Before you can use your new  
remote, you will need to program it to  
operate the specific home entertain-  
ment components you wish to control.  
Follow the instructions detailed in this  
manual to set up your One For All  
Access 4 and enjoy your new remote  
control.  
The SETUP key is used to  
program your One For All  
Access 4.  
SETUP  
To program the One For All Access 4  
to operate your TV:  
POWER  
The POWER key operates  
the POWER ON and OFF  
for your TV, VCR and Cable  
Converter.  
Gibralter  
Goldstar  
1.  
2.  
Turn on your TV.  
Press TV and release.  
Press and hold SETUP until  
the One For All Access 4’s  
red light blinks twice, then  
release SETUP.  
TV  
Gradiente  
Grunpy  
Hallmark  
Harman/Kardon 0078  
Harvard  
Hitachi  
SETUP  
The RECALL key operates  
the PREVIOUS CHANNEL  
or LAST CHANNEL  
RECALL feature of your TV,  
VCR and Cable Converter.  
Please note that most  
VCRs do not have a LAST  
or PREVIOUS CHANNEL  
feature. If this is the case  
with your VCR, then  
RECALL will not have any  
function in the VCR mode.  
RECALL  
Features and Functions  
0180, 0068  
The illustration below and the chart  
immediately after describe the features  
and functions of the One For All  
Access 4 universal remote control. Use  
the drawing to locate each key on the  
remote, then refer to the chart for a  
description of the corresponding  
function each key performs.  
0145, 0151, 0056, 0409,  
0413, 0038, 0279, 0032  
0054  
0054  
0000  
0053, 0036, 0069, 0160,  
0169, 0182  
0046  
0180  
0106  
0030, 0180, 0183, 0185,  
0217, 0280, 0039  
0216  
0158, 0216  
0052  
0019, 0030  
0024, 0046, 0078  
3.  
4.  
5.  
Enter the first four-digit TV  
code listed for your brand in  
the “SETUP CODES FOR  
TVs” section. If you perform  
this procedure correctly, the  
red light will blink twice  
when you enter the final  
digit of your code.  
Infinity  
JBL  
JCB  
JVC  
Janeil  
KEC  
KMC  
KTV  
SLEEP  
The SLEEP key accesses  
the sleep function of your  
TV or Cable Converter,  
provided the component  
has a SLEEP TIMER  
function.  
POWER  
Aim the One For All Access  
4 at your TV and press  
POWER  
Kamp  
AUX  
CBL  
POWER.Your TV should  
turn off. If your TV does not  
respond, repeat steps 2-4,  
trying each code listed for  
your brand until you find the  
one that operates your TV.  
Kawasho  
Kaypani  
Kenwood  
Kloss  
LG0056  
LXI  
VCR  
TV  
CH  
The TV, VCR, CBL, and  
AUX keys are used to  
select the home entertain-  
ment component you want  
to control.  
TV  
VCR  
0047, 0054, 0154, 0156,  
0178, 0148  
0016  
0056  
0185  
0150, 0155, 0019, 0030,  
0178  
0019, 0030, 0056, 0060,  
0091, 0185, 0216  
0054, 0096, 0186, 0187,  
0030, 0020, 0024, 0028,  
0036, 0230, 0386, 0171,  
0179  
0016, 0015  
0054, 0030  
0250  
VOL –  
VOL  
+
CBL  
AUX  
Logik  
Luxman  
MEI  
CH  
Your One For All Access 4  
is now programmed to  
operate your TV. Write your  
TV code in the boxes to the  
left for future reference.  
MGA  
The ENTER key operates  
the same as the ENTER  
key on your original remote.  
REW  
PLAY  
FF  
ENTER  
VCR CONTROL  
REC  
MTC  
STOP  
PAUSE  
Magnavox  
The REC (Record), PAUSE,  
REW (Rewind), PLAY, FF  
(Fast Forward), STOP and  
TV/VCR operate the same  
as the keys on your original  
VCR remote. As a safety  
feature on the One For All  
Access 4, you must press  
the REC key twice.  
REC  
PAUSE  
REW  
Remember, if you want to use your  
One For All Access 4 to operate your  
TV, press the TV key first.  
Majestic  
Marantz  
Matsushita  
Megatron  
Memorex  
PLAY  
TV/ VCR  
ENTER  
FF  
STOP  
0178, 0003, 0145  
0150, 0154, 0056, 0178,  
0016, 0106  
0047, 0051, 0017, 0135,  
0032, 0039  
SETUP CODES FOR TVs  
TV/ VCR  
A-Mark  
AOC  
0003  
Midland  
0019, 0030, 0052, 0003,  
0137, 0185  
Installing the Batteries  
Minutz  
Mitsubishi  
0021  
Abex  
Admiral  
0032  
0150, 0155, 0093, 0178,  
0019, 0098, 0241  
0093, 0055  
0093, 0165, 0179, 0180,  
Your One For All Access 4 requires  
four (4) new AAA alkaline batteries.  
To install the batteries:  
0016, 0047  
0046  
0092  
Motorola  
Multitech  
NAD  
Adventura  
Aiko  
0180, 0217  
Feature – Function  
0156, 0166, 0178  
0019, 0030, 0056, 0036,  
0170  
0092  
0030, 0092, 0178  
0430  
0018  
0180  
0154, 0166, 0250  
0093, 0165  
0236  
Akai  
Alaron  
0030, 0098  
0179, 0183, 0216  
1.  
2.  
3.  
4.  
On the back of the One For  
All Access 4 , pull back on  
the tab and lift the battery  
cover off.  
NEC  
The Red Light (LED)  
flashes red to show that the  
remote is working.  
Ambassador  
Anam  
Anam National  
Archer  
0177  
0180, 0068  
0055  
0003  
NTC  
Nikko  
Noblex  
Noshi  
Onwa  
Optimus  
Optonica  
Orion  
The function of GLOW keys  
: VOL-/+, CH /and  
DIGIT keys are shown below :  
Astro Text  
Audiovox  
Baysonic  
Belcor  
Bell & Howell  
Bradford  
Brockwood  
Broksonic  
CCE  
0379  
0003, 0180  
0180  
0019  
0154, 0016  
0180  
0019  
0003  
Match the + and - marks on  
the batteries to the + and -  
marks in the battery case,  
then insert the batteries.  
The VOL +/- (Volume Up/  
VOL +  
VOL —  
Down) operate the  
VOLUME UP/DOWN of  
your home entertainment  
components.  
Panasonic  
0250, 0051, 0055, 0162,  
0226, 0338  
Press the battery cover  
back into place.  
Penney  
0047, 0156, 0060, 0178,  
0018, 0019, 0021, 0027,  
0030, 0051, 0149, 0002,  
0003, 0135, 0032, 0039  
0054, 0096, 0145, 0030,  
0019, 0020, 0028  
0054  
0019, 0030, 0039  
0166, 0038  
0092, 0019, 0039  
0051  
0217, 0329  
CXC  
Candle  
0180  
The CH /(Channel Up/  
Down) keys operate the  
CHANNEL UP/DOWN  
feature of your home  
0030, 0056, 0186, 0046  
CH  
CH  
Philco  
Carnivale  
Carver  
Celebrity  
Cineral  
0030  
0054, 0170  
0000  
0451, 0092  
Test the unit by pressing  
POWER. If the batteries are  
inserted correctly, the red  
light (LED) will blink once.  
POWER  
Philips  
Pilot  
Pioneer  
Portland  
Prism  
Proscan  
Proton  
Pulsar  
Quasar  
entertainment components.  
Citizen  
0030, 0056, 0060, 0092,  
0186, 0280, 0561, 0039,  
The DIGIT keys (0-9)  
operate the same as the  
digit keys on your original  
remote.  
0046  
0185  
0056  
NOTE: Removing the batteries for  
more than 15 minutes will require you  
to reprogram your remote.  
0047  
Clairtone  
Concerto  
Contec  
Craig  
0466, 0178, 0003, 0052  
0017, 0019  
0250, 0051, 0055, 0165  
0180, 0185, 0158, 0157  
0180  
 
Locate the brand name of your 2nd TV  
in the “SETUP CODES FOR TVs”  
section. The brands are listed in  
alphabetical order with the most  
popular codes listed first. You will use  
one of these codes to program your  
One For All Access 4 to operate your  
2nd TV.  
NOTE: To search for the codes of your  
other components, repeat Steps 1  
through 5, only substitute the  
appropriate device key (VCR, CBL or  
AUX) for the component you are  
searching for.  
Northcoast  
Novaplex  
Oak  
Optimus  
Panasonic  
Panther  
Paragon  
Philips  
0314, 0671  
0618  
0019, 0007  
0021  
0021, 0107, 0000  
0637  
0000  
0153, 0025, 0027, 0028,  
0029, 0030, 0031, 0242,  
0290, 0334, 0649  
0753, 0533, 0144, 0023,  
0260  
3.  
Enter the first four-digit  
Cable Converter or DBS  
Satellite code listed for your  
brand in the “SETUP  
CODES FOR CABLE  
CONVERTERS” or “SETUP  
CODES FOR DBS  
SATELLITES” section. If  
you perform this procedure  
correctly, the red light will  
blink twice when you enter  
the final digit of your code.  
Aim the One For All Access  
4 at your Cable Converter  
or DBS Satellite and press  
POWER. Your Cable  
Converter or DBS Satellite  
should turn off. If your Cable  
Converter or DBS Satellite  
does not respond, repeat  
steps 2-4, trying each code  
listed for your brand until  
you find the one that  
*If you are searching for your VCR  
code, you may want to use the PLAY  
key instead of the POWER key to  
search for your code. When your  
VCR starts to play, press SETUP to  
lock in your code.  
To program the One For All Access 4  
Pioneer  
Popular  
Mechanics  
Prelude  
Pulsar  
to operate your 2nd TV:  
1.  
2.  
Turn on your 2nd TV.  
0400  
0770  
0000  
0021  
Press AUX and release.  
Press and hold SETUP until  
the One For All Access 4’s  
red light blinks twice, then  
release SETUP.  
4.  
POWER  
AUX  
LearningThe Codes  
Programmed IntoThe  
One For All Access 4  
SETUP  
RCA  
RadioShack  
Realistic  
Recoton  
Regal  
Regency  
Rembrandt  
Runco  
0015, 0315  
0207, 0241  
0400  
0020, 0259, 0273, 0279  
0002  
0011, 0070  
0000  
0040  
3.  
4.  
Enter the first four-digit TV  
code listed for your brand in  
the “SETUP CODES FOR  
TVs” section. If you perform  
this procedure correctly, the  
red light will blink twice  
when you enter the final  
digit of your code.  
If you have set up the One For All  
Access 4 using the “Searching For  
Your Code” procedure, you may need  
to find out which four-digit code is  
operating your equipment. Use this  
procedure after you have set up your  
components to find out which four-digit  
code is operating your equipment. For  
example, to find out which code is  
operating your TV after setting up your  
TV using the “Searching for Your Code”  
procedure:  
SL Marx  
Samsung  
0040, 0144  
Scientific Atlanta 0477, 0008, 0017, 0006  
Seam  
Signal  
operates your Cable  
Converter.  
0510  
0015, 0040  
0011  
0021, 0307  
0422, 0542  
0003, 0015, 0047  
0015, 0040, 0770  
0015  
0001  
0310  
0063  
0258  
0097  
0146  
0221  
0040  
Signature  
Sprucer  
StarSight  
Starcom  
Stargate  
Starquest  
Sylvania  
TFC  
5.  
Your One For All Access 4  
is now programmed to  
operate your Cable  
Converter or DBS Satellite.  
Write your Cable Converter  
or DBS Satellite code in the  
boxes to the left for future  
reference.  
POWER  
Aim the One For All Access  
4 at your 2nd TV and press  
POWER.Your 2nd TV should  
turn off. If your 2nd TV does  
not respond, repeat steps  
2-4, trying each code listed  
for your brand until you find  
the one that operates your  
2nd TV.  
1.  
Press TV and release.  
Press and hold SETUP until  
the One For All Access 4’s  
red light blinks twice, then  
release SETUP.  
TV  
SETUP  
TV86  
Tandy  
Tatung  
Teknika  
TeleCaption  
Teleview  
Texscan  
Timeless  
Tocom  
Toshiba  
Tusa  
Unika  
NOTE: If your original cable converter  
remote control did not have an “ON”  
key, press CHon the One For All  
Access 4 to turn your Cable Converter  
ON.  
2.  
3.  
Press 9 - 9 - 0.  
9 - 9 - 0  
5.  
Your One For All Access 4  
is now programmed to  
operate your 2nd TV. Write  
your 2nd TV code in the  
boxes to the left for future  
reference.  
0001  
0418  
0012, 0013, 0059  
0000  
For the first digit of your  
four-digit code, press 1, wait  
3 seconds and count the  
number of times the red  
light (LED) blinks on the  
One For All Access 4. If the  
light does not blink when  
you press the number 1, the  
digit is zero.  
1
0015  
Remember, if you want to use your  
One For All Access 4 to operate your  
Cable Converter or DBS Satellite,  
press the CBL key first.  
0022, 0153, 0207, 0241,  
0309  
0007  
0003  
0153, 0022, 0039, 0056,  
0077, 0078, 0191, 0207,  
0241  
United Artists  
United Cable  
Universal  
Remember, if you want to use your  
One For All Access 4 to operate your  
2nd TV, press the AUX key first.  
SETUP CODES FOR CABLE  
CONVERTERS  
ABC  
0001, 0003, 0007, 0008,  
0011, 0013, 0014, 0017,  
0047  
0153, 0315  
0022, 0207, 0241  
0797, 0022, 0039, 0153,  
0207, 0241, 0309  
0267  
0056  
0056  
0022  
0022  
0153, 0309  
0153, 0309, 0315  
0025, 0031  
0232, 0233  
0040, 0060  
0019  
0637  
0002  
0078  
0797  
4.  
5.  
6.  
For the second digit, press  
2, wait 3 seconds and count  
the number of times the red  
light (LED) blinks on the  
One For All Access 4. If the  
light does not blink when  
you press the number 2, the  
digit is zero.  
Videoway  
Viewstar  
0250  
2
3
4
0063, 0027, 0060, 0211,  
0258, 0289  
0525, 0000, 0054  
0400  
Searching ForYour Code  
Allegro  
Antronix  
Archer  
Zenith  
Zentek  
If your TV, VCR or Cable Converter  
does not respond to the One For All  
Access 4 after trying all of the codes  
listed for your brand, or if your brand is  
not listed at all, try searching for your  
code. For example, after trying all of  
the codes for your TV, you still cannot  
get the One For All Access 4 to  
SETUP CODES FOR DBS  
SATELLITES  
AlphaStar  
Echostar  
ExpressVu  
General  
Instrument  
HTS  
Hitachi  
Hughes Network  
Systems  
Jerrold  
Magnavox  
Memorex  
Panasonic  
Philips  
Primestar  
RCA  
Sony  
BBT  
Belcor  
0772  
0775  
0775  
Cable Star  
Cabletenna  
Cableview  
Century  
Citizen  
Colour Voice  
Comband  
Comtronics  
Contec  
For the third digit, press 3,  
wait 3 seconds and count  
the number of times the red  
light (LED) blinks on the  
One For All Access 4. If the  
light does not blink when  
you press the number 3, the  
digit is zero.  
0361  
0775  
0819  
operate your TV, then:  
1.  
2.  
Turn on your TV.  
0749  
Press TV and release.  
Press and hold SETUP until  
the One For All Access 4’s  
red light blinks twice, then  
release SETUP.  
TV  
0627, 0361  
0722, 0724  
0724  
Digi  
Eastern  
Electricord  
Emerson  
Everquest  
Focus  
FutureVision  
GC Electronics  
GE  
GMI  
Garrard  
Gemini  
General  
Instrument  
Goldstar  
Goodmind  
Hamlin  
SETUP  
0701  
For the fourth and final digit,  
press 4, wait 3 seconds and  
count the number of times  
the red light (LED) blinks on  
the One For All Access 4. If  
the light does not blink  
0722, 0724  
0627, 0361  
0566  
0639  
0790  
0015, 0040  
0400  
0649  
0056, 0207  
0232, 0233  
0057  
0153, 0309  
0015, 0057, 0070, 0242  
3. 9 - 9 - 1 Press 9 - 9 - 1.  
Toshiba  
Uniden  
POWER  
4.  
Slowly alternate between  
0724  
pressing POWER* and TV  
until your TV turns OFF.  
Make sure that the One For  
All Access 4 is aimed at  
your TV during the search.  
You may have to press this  
sequence of buttons  
TV  
when you press the number  
4, the digit is zero. Now you  
have your four-digit code.  
Programming the AUX key:  
The AUX key is already set up to  
accept codes for a second TV. If you  
would like to set up the AUX key for a  
second TV, follow the instructions listed  
below. If you would like the AUX key to  
control a second VCR or Cable  
Converter, follow the instructions in the  
“Re-assigning Device Keys” section to  
re-assign the AUX key to accept VCR  
or Cable Converter codes. If you are  
setting up a second TV:  
0476, 0003, 0011  
0040, 0144  
0797  
0259, 0009, 0020, 0034,  
0273  
0011  
NOTE: To find out the code for your  
other components, repeat Steps 1  
through 6, only substitute the  
appropriate device key (VCR, CBL or  
AUX) for the component code you wish  
to learn.  
(POWER* then TV) up to  
100 times to search the  
entire library of codes.  
Hitachi  
Hytex  
Jasco  
Jerrold  
0007  
0153, 0309, 0315  
0476, 0003, 0012, 0014,  
0011, 0015, 0024, 0047  
0440  
0033  
0027, 0069, 0334  
0000  
SETUP  
5.  
When your TV turns OFF,  
press and release SETUP  
to lock in the code for your  
TV. Your One For All Access  
4 is now programmed to  
operate your TV.  
Linsay  
Macom  
Magnavox  
Memorex  
Movie Time  
NSC  
Locate the brand name of your 2nd TV  
and then write it in the space below.  
0063, 0078, 0156  
0063, 0070, 0156  
2nd TV Brand: __________________  
 
Now, whenever you press  
VOL +, VOL - or MUTE your Cable  
Converter or VCR will control the  
volume.  
This product has been discontinued and is no longer supported.  
Re-Assigning Device  
Keys  
You can use the One For All Access 4  
to operate a second TV or a second  
VCR or any combination of four home  
entertainment components. For  
example, you may want your One For  
All Access 4 to control 1 TV, 1 Cable  
Converter and 2 VCRs. To accomplish  
this, you must re-assign the AUX key  
to operate the desired component, in  
this case, a second VCR. The chart  
below shows you how to re-assign a  
particular device key and then set up  
your new component.  
To change the Volume Lock setting on  
the One For All Access 4 so each  
mode controls its own volume:  
SETUP  
1.  
Press and hold SETUP until  
the One For All Access 4’s  
red light blinks twice, then  
release SETUP.  
2.  
3.  
Press 9 - 9 - 3.The One For  
All Access 4’s red light will  
blink twice.  
Press and release VOL +.  
The One For All Access 4’s  
red light will blink twice.  
9 - 9 - 3  
TV to VCR SETUP* + 992 + VCR +  
TV + TV + SETUP* +  
VOL +  
VCR code.  
TV to CBL  
VCR to TV  
SETUP* + 992 + CBL +  
TV + TV + SETUP* +  
Cable/DBS code.  
Now, whenever you press  
VOL +, VOL - or MUTE on the One For  
All Access 4 each component will  
control its own volume.  
SETUP* + 992 + TV +  
VCR + VCR + SETUP*  
+ TV code.  
Trouble Shooting  
VCR to CBL SETUP* + 992 + CBL +  
VCR + VCR + SETUP*  
Problem  
Solution  
+ Cable/DBS code.  
Red light not  
blinking when  
you press a  
key?  
Replace the batteries  
with four (4) new AAA  
alkaline batteries.  
CBL to TV  
SETUP* + 992 + TV +  
CBL + CBL + SETUP*  
+ TV code.  
One For All® is a trademark of Universal Electronics Inc.  
The red light  
Make sure you press  
CBL to VCR SETUP* + 992 + VCR +  
CBL + CBL + SETUP*  
+ VCR code.  
Copyright 1998 by Universal Electronics Inc. No part of this publication may be repro-  
duced, transmitted, transcribed, stored in any retrieval system, or translated to any  
language, in any form or by any means, electronic, mechanical, magnetic, optical,  
manual, or otherwise, without the prior written permission of Universal Electronics Inc.  
blinks when you the device key first, then  
press a key but  
you receive no  
response from  
your home  
entertainment  
component?  
aim your One For All  
Access 3 at your home  
entertainment  
AUX to TV  
SETUP* + 992 + TV +  
AUX + AUX + SETUP*  
+ TV code.  
component. Also make  
sure that you are within  
15 feet of the  
component you are  
trying to operate before  
using your remote.  
AUX to VCR SETUP* + 992 + VCR +  
AUX + AUX + SETUP*  
+ VCR code.  
This One For All® product is designed for compatibility in North America  
excluding Mexico.  
The One For All  
Try all of the codes  
listed for your brand of  
AUX to CBL SETUP* + 992 + CBL +  
AUX + AUX + SETUP*  
Access 4 does  
URC-4700 - One For All Access 4 With Glow Key  
not operate your home entertainment  
+ Cable/DBS code.  
home  
component in the  
“SETUP CODES”  
entertainment  
components or  
is not  
*NOTE: Here you must hold SETUP  
until the One For All Access 4’s red  
light blinks twice.  
section. Many setup  
codes may allow for  
partial functionality,  
however, only one set  
up code will operate  
your home entertain-  
ment component  
World Wide Web:  
performing  
commands  
properly?  
Volume Lock  
Volume Lock allows the user to  
designate which component will control  
the volume in the TV, VCR and CBL  
modes. To set the Volume Lock to the  
TV mode:  
correctly. Make sure all  
of the components  
that you are setting up  
can be operated with  
an infrared remote  
control.  
1.  
SETUP  
Press and hold SETUP until  
the One For All Access 4’s  
red light blinks twice, then  
release SETUP.  
Problems  
programming a  
TV/VCR  
Use the VCR set-up  
codes for your brand.  
Some combo units,  
however, may require  
both a TV code to  
control volume and a  
VCR code for the  
remaining functions.  
combo?  
9 - 9 - 3  
2.  
3.  
Press 9 - 9 - 3. The One For  
All Access 4’s red light will  
blink twice.  
TV  
Press and release TV.The  
One For All Access 4’s red  
light will blink twice.  
VCR not  
recording?  
As a safety feature on  
the One For All Access  
4, you must press the  
REC key twice.  
Now, whenever you press  
VOL +, VOL - or MUTE in the VCR or  
CBL mode your TV will control the  
volume.  
CH/▲  
Due to RCA design  
(1983-1987), only the  
original remote control  
will operate these  
(Channel  
Up/Down) and  
RECALL not  
To change the Volume Lock setting on  
the One For All Access 4 to the VCR or  
CABLE mode:  
working for your functions.  
RCA TV?  
Problems  
changing  
channels?  
If your original remote  
control required an  
SETUP  
1.  
Press and hold SETUP until  
the One For All Access 4’s  
red light blinks twice, then  
release SETUP.  
ENTER keystroke when  
changing channels,  
press the ENTER key  
on the One For All  
9 - 9 - 3  
2.  
3.  
Press 9 - 9 - 3. The One For  
All Access 4’s red light will  
blink twice.  
Access 4 after you enter  
the channel number.  
Keypad  
scrambled?  
Press and hold SETUP  
until the One For All  
Access 4’s red light  
blinks twice. Release  
SETUP and enter  
9-8-7.  
Press and release CBL or  
VCR. The One For All  
Access 4’s red light will blink  
twice.  
CBL  
VCR  
 

MXL Microphone MXL 550 User Manual
National Instruments Car Stereo System SCXI 1125 User Manual
NEC Telephone P N 1093099 User Manual
Oki Printer 20DX User Manual
Oki Printer ML591 User Manual
Onkyo Stereo System S3200 User Manual
OWI Portable Speaker T503 User Manual
Palsonic CRT Television 5130GM User Manual
Panasonic Air Compressor DA86C15RCU6 User Manual
Panasonic Fax Machine KX FLB751AL User Manual